Skip to main content

Econometrics for finance - Returns in financial modelling

In many of the problems of interest in finance, the starting point is a time series of prices -- for example, the prices of shares in Ford, taken at 4p.m. each day for 200 days. For a number of statistical reasons, it is preferable not to work directly with the price series, so that raw price series are usually converted into series of returns. Additionally, returns have the added benefit that they are unit-free. So, for example, if an annualized return were 10%, then investors know that they would have got back 110 for a 100 investment, or 1,100 for a 1,000 investment, and so on. There are two methods used to calculate returns from a series of prices, and these involve the formation of simple returns, and continuously compounded returns, which are achieved as follows:
Simple returns
Continuously compounded returns
Rt =     (pt pt1) / pt1  × 100%      (1.1)

rt = 100% × ln(pt/ pt1)          (1.2) 
If the asset under consideration is a stock or portfolio of stocks, the total return to holding it is the sum of the capital gain and any dividends paid during the holding period. However, researchers often ignore any dividend payments. This is unfortunate, and will lead to an underestimation of the total returns that accrue to investors. This is likely to be negligible for very short holding periods, but will have a severe impact on cumulative returns over investment horizons of several years. Ignoring dividends will also have a distortionary effect on the crosssection of stock returns. For example, ignoring dividends will imply that ‘growth’ stocks, with large capital gains will be inappropriately favoured over income stocks (e.g. utilities and mature industries) that pay high dividends.where: Rt denotes the simple return at time t, rt denotes the continuously compounded return at time t, pt denotes the asset price at time t, and ln denotes the natural logarithm.

Box 1:
(1)        Log-returns have the nice property that they can be interpreted as continuously compounded returns – so that the frequency of compounding of the return does not matter and thus returns across assets can more easily be compared.
(2)        Continuously compounded returns are time-additive. For example, suppose that a weekly returns series is required and daily log returns have been calculated for five days, numbered 1 to 5, representing the returns on Monday through Friday. It is valid to simply add up the five daily returns to obtain the return for the whole week:
Monday return                        r1 = ln (p1/p0) = ln p1 ln p0
Tuesday return                        r2 = ln (p2/p1) = ln p2 ln p1
Wednesday return                   r3 = ln (p3/p2) = ln p3 ln p2
Thursday return                      r4 = ln (p4/p3) = ln p4 ln p3
Friday return                           r5 = ln (p5/p4) = ln p5 ln p4
——————————–
Return over the week               ln p5 ln p0 = ln (p5/p0)

Alternatively, it is possible to adjust a stock price time series so that the dividends are added back to generate a total return index. If pt were a total return index, returns generated using either of the two formulae presented above thus provide a measure of the total return that would accrue to a holder of the asset during time t.
The academic finance literature generally employs the log-return formulation (also known as log-price relatives since they are the log of the ratio of this period’s price to the previous periods price). Box 1 shows two key reasons for this. There is, however, also a disadvantage of using the log-returns. The simple return on a portfolio of assets is a weighted average of the simple returns on the individual assets. But this does not work for the continuously compounded returns, so that they are not additive across a portfolio. The fundamental reason why this is the case is that the log of a sum is not the same as the sum of a log, since the operation of taking a log constitutes a non-linear transformation. Calculating portfolio returns in this context must be conducted by first estimating the value of the portfolio at each time period and then determining the returns from the aggregate portfolio values. Or alternatively, if we assume that the asset is purchased at time t K for price PtK and then sold K periods later at price Pt , then if we calculate simple returns for each period, Rt , Rt+1, . . . ,RK, the aggregate return over all K periods is

RKt = (Pt PtK)/PtK =  Pt/PtK 1 = (Pt/Pt1 X Pt1/Pt2 X  . . . X PtK+1/PtK) – 1= [(1 + Rt )(1 + Rt1) . . . (1 + RtK+1)] – 1

In the limit, as the frequency of the sampling of the data is increased so that they are measured over a smaller and smaller time interval, the simple and continuously compounded returns will be identical.

Popular posts from this blog

Structure of a Research Article

UNIT ROOT TEST

Stationarity and Unit Root Testing l   The stationarity or otherwise of a series can strongly influence its behaviour and properties - e.g. persistence of shocks will be infinite for nonstationary series l   Spurious regressions. If two variables are trending over time, a regression of one on the other could have a high R 2 even if the two are totally unrelated l   If the variables in the regression model are not stationary, then it can be proved that the standard assumptions for asymptotic analysis will not be valid. In other words, the usual “ t -ratios” will not follow a t -distribution, so we cannot validly undertake hypothesis tests about the regression parameters. Stationary and Non-stationary Time Series Stationary Time Series l   A series is said to be stationary if the mean and autocovariances of the series do not depend on time. (A) Strictly Stationary : n   For a strictly stationary time series the distribution of   y(t) is independent of t .   Thus it is not just

Research Designs According to Purpose